Patented Track Cranes components are vital to the overall function and capabilities of the overhead handeling system. The following is an overview of various types of components.
Simple enough to be easily maintained, rugged enough to handle heavy loads, flexible enough to suit a variety of handling operations, Patented Track Cranes monorail systems are noted for their work-saving performance and complete reliability. The inherent efficiency and speed of the Patented Track Crane monorail systems can be developed to utilize switches, lift sections, and other accessories to futher reduce labor costs and effect an increase in productivity.

This site Designed & Hosted by Systematic Services

 

 

 
Patented Track Crane tracks are manufactured using various thickness and widths of top flange and web plates and two rail sizes. Light rails have a 7/16 inch thick load carrying flange and heavy rails have an 11/16 inch thick flange. A 3-3/4 inch uniform width of the load carrying flange is maintained regardless of the load or depth of the track. This allows interchangeability of carriers and provides an effcient and economical overall system.

Trambeam track is classified into three types. Light rail sections, heavy rail sections and bridge girders.

The Patented Track Crane gimbal suspension system uses multiplane washers at each end of the hanger rod to provide a gimbal assembly. The tapered planes on the top surface of the washers are positioned at right angles to the tapered planes on the bottom surface. This allows free rod movement of 6 degrees in any direction.
Patented Track Crane end trucks have been engineered for peak performance. A minimum of maintenance is required and it is usually performed during routine inspection. Three series are manufactured, light duty single girder, standard single girder and double girder cranes.
Patented Track Crane carriers are engineered to provide efficent and stable operation for the life of the system. Since the efficiency of an overhead handling system is dependent directly on the carriers, Patented Trackm Cranes has laid particular stress on developing a line of manual and motor-driven carriers possessing outstanding quality.
Patented Track Crane provides two types of drives, a motor driven head and a tractor drive, which are used for propelling Patented Track cranes and carriers. Each is available in a wide range of speeds and horsepower selections. Each drive operates as an individual unit and will eliminate the necessity of a squaring shaft between the trucks.